These are a set of 4 Triumph Rocker Box Studs, Nuts and Lock Washers in Stainless Steel. These studs are 5-7/16" Under Head. These are made for the unit construction 3TA, 5TA, T90, T100ss, T100a. Two of the studs have threaded extensions at the top to take the engine steady, there are 2 nuts and washers supplied to clamp the steady to the engine.
The cycle studs and nuts have the correct 60 degree thread angle; and the correct spanner size across the flats, 6 rectangular section stainless lock washers are included. All studs have a slight radius on the end the same as original. The Triumph part numbers for these studs are E3794 and E3795. These will fit the 350/500cc unit motors. They are 5-7/16" under head. H17, H18 2 of each.
The nuts have a single sided chamfer and are machined back and front to leave a nicely machined finish, each flat of the hexagon has been hand finished to leave a bright surface rather than the dull finish normally found on hex bar. All nuts are semi polished so they can easily be polished to a mirror finish or bead blasted to give that original cadmium look.
Please note all stainless parts MUST be assembled with copa slip (copper slip). Available form this site.
Made in England