9904 Triumph Rear Suspension Hagon Shock E2113a-10mm-set J48 J36

Triumph Unit and Pre Unit rear suspension bolts, nuts and washers in stainless steel. These bolts are 10mm dia x 29mm long, the length under the head is 2" on two bolts and 1-3/4" on the other two with 0.520" A/F Heads the same size as the originals. The shanks are 10mm diameter but with the standard 3/8" cycle thread. They have been made to allow you to fit the Hagon Shocks that only come with a 10mm bushed eye; if you use the standard 3/8" bolts they will be loose in the eye and knock. To use these you will have to open out the outer hole in the support lug by about 0.020". Please check these fit your machine before ordering. Triumph part number E2113a-10mm. There are another set E2113-10mm which has 4 x 2" bolts. The bolts have a slightly domed head and are the same spanner size and thread rate as the originals.

Please note all stainless parts MUST be assembled with copa slip (copper slip). Also listed on this site All British thread data can be viewed on our web site. Any queries please phone Motalia on 01953 789420 office hours. Made in England J48 x 2 + J36 x 2 + L/W x4 Pw x4 ncf38026s x 4. nuts L13 E2113a-10mm-set - J48/J36