This is the footrest stud triumph part number F3592. It will fit all swinging arm models from 1954 to 1962 which includes the duplex models. It is supplied with stainless nuts and lock washers and the threads and nuts are the same as the originals. The length is 11-1/4"
The stud has a slight radius on the end the same as original. The radius is left as a machined finish so that you can either polish it to a mirror finish or sand blast it for a cadmium look.
The nuts have a single sided chamfer and are machined back and front to leave a nicely machined finish, each flat of the nuts have been linished to leave a bright finish rather than the dull finish normally found on nuts turned from hex bar.
Please note all stainless parts should be assembled with copa slip (copper slip).
All British thread data can be viewed on our web site.
These items are Made in England.
STFF121114 - V3-38
Delivery to Portugal, Greece, Turkey and Spain is unreliable and cannot be guaranteed, if you order from these countries you do so at your own risk. It is not uncommon for delivery to take 30 days or more.