Norton ES2 Plunger Stainless Engine Plate Studs 1948-52 ES2-eps

These are a set of Norton ES2 engine plate studs, nuts and washers in stainless steel. They will fit the ES2 Plunger frame from 1948 to 1952. All the studs have the same cycle rate threads as the originals. The nuts are also identical to the originals with the odd hexagon sizes as used by Norton. Most of the studs are 7/16 cycle but not the normal 26 tpi. The set is complete with stainless washers and the four special bolts that go above the gearbox. All thread angles are 60 degree the same as the originals. ES2-EPS

T03x4,V3-36,V3-42,V3-24,V3-10,J34x2,J45, J39,Q07x2+l/w